Description
Glacier Seal is a thick acrylic elastomeric roof sealant intended for application to metal, asphalt, modified bitumen, BUR, and most single-ply roofs. A high degree of rubber-like elasticity allows this product to accommodate wide swings in temperature and significant building movement. Glacier Seal should be used to repair roofs and seal metal roof fasteners before coating with the Glacier SRC System. Glacier Seal is UV-stable and may be used for general-purpose typical repairs.
Product Instructions
Mix in any separated material before use. Do not store above 90ºF. Apply only at temperatures above 40ºF and rising with less than 90% humidity and no threat of rain for 48 hours. Surface
temperatures should be under 100ºF to avoid premature curing. If the roof surface is hot, apply a light water spray to reduce its temperature. Rusted areas must be primed with Glacier Bond Metal Primer. All fasteners should be inspected. Broken, missing, or loose fasteners must be tightened or replaced according to manufacturers’ recommendations. Seal fasteners and vertical seams with Glacier Seal. The material should be applied one-quarter inch thick with a brush or trowel and extend two inches on either side of the fastener or vertical seam. For added strength, reinforced with polyester fabric.
Clean Up: Soap and water (wet coating).
Shelf Life: One year from the date of manufacture.
Reviews
There are no reviews yet.